广东安规
产品中心|灯头量规

当前位置: 首页 > 仪器设备 > IEC60884插头插座仪器设备
IEC60884插头插座仪器设备

IEC60884 盖或盖板的试验装置

 IEC60884 盖或盖板的试验装置
  • 型号 : AG884F31
  • 品牌 : 广东安规
  • 标准依据 : IEC60884-1第24.14.2节及图31
盖或盖板的试验装置是根据标准IEC60884-1第24.14.2节及图31设计制造而成

详细描述

盖或盖板的试验装置是根据标准IEC60884-1第24.14.2节及图31设计制造而成。

 

IEC60884-1标准要求:

24.14.2 Verification of the removal of covers or cover-plates
A force not exceeding 120 N is gradually applied, perpendicular to the mounting/supporting surfaces, to covers, cover-plates or parts of them by means of a hook placed in turn in each of the grooves, holes, spaces or the like, provided for removing them.
The covers or cover-plates shall come off.
The test is made 10 times on each separable part, the fixing of which is not dependent on screws, the removal force being applied each time to the different grooves, holes, or the like provided for removing the separable part, equally distributing as far as practicable the application points.
The test is then repeated on new specimens, the cover or cover-plate being fitted on the wall after a sheet of hard material, (1 ± 0,1) mm thick, has been fitted around the supporting frame, as shown in figure 31.
After the test, the specimens shall show no damage within the meaning of this standard.

 

产品规格参数:

1、材质:不锈钢

2、厚度:1mm

 

点击次数:  更新时间:2020-02-13  【打印此页】  【关闭
在线交流 
销售工号303 销售工号303
销售工号373 销售工号373
销售工号973 销售工号973
技术fasten 技术fasten
0769-23600626
sales@eychi.com
13650052332
13650000331

验证码:广东安规
否则拒绝!