广东安规
产品中心|灯头量规

当前位置: 首页 > 仪器设备 > IEC60884插头插座仪器设备
IEC60884插头插座仪器设备

IEC60884-1 插座横向应力试验装置

 IEC60884-1 插座横向应力试验装置
  • 型号 : AG884F13
  • 品牌 : 广东安规
  • 标准依据 : IEC60884-1图13
插座横向应力试验装置是广东安规检测有限公司根据标准IEC60884-1图13要求设计制造而成。

详细描述

插座横向应力试验装置是广东安规检测有限公司根据标准IEC60884-1图13要求设计制造而成,砝码未在图示中显示出来。

 

IEC60884-1标准要求:

13.14 Socket-outlets shall withstand the lateral strain imposed by equipment likely to be introduced into them.
For socket-outlets having ratings up to and including 16 A and 250 V, compliance is checked by means of the device shown in figure 13.
Each specimen is mounted on a vertical surface with the plane through the socket-contacts horizontal. The device is then fully engaged and a weight hung on it such that the force exerted is 5 N.
The device is removed after 1 min and the socket-outlet is turned through 90° on the mounting surface. The test is made four times, the socket-outlet being turned through 90° after each engagement.
During the test the device shall not become disengaged from the socket-outlet.
After the tests, the socket-outlets shall show no damage within the meaning of this standard; in particular, they shall comply with the requirements of clause 22.
NOTE Other socket-outlets are not tested.

 

产品规格参数:

1、砝码:5N,各个标准可能有不一样的要求

2、试验插头:图示为GB2099.1要求的插头,各个标准带有不同的插头

3、装置带角度旋转功能。

 

 

点击次数:  更新时间:2020-02-13  【打印此页】  【关闭
上一条:没有了  下一条: IEC60884 盖或盖板的试验装置
在线交流 
销售工号303 销售工号303
销售工号373 销售工号373
销售工号973 销售工号973
技术fasten 技术fasten
0769-23600626
sales@eychi.com
13650052332
13650000331

验证码:广东安规
否则拒绝!