专业的安规检测设备源头制造商紧跟标准——紧跟IEC、UL、ISO各种标准为您报价、设计与生产
创新智能——带遥控器的灼热丝、针焰、燃烧机、IP淋雨试验机，行业独创领先
专业诚信——专业到您吃惊，一直被模仿，从未被超越
薄层材料抗电强度试验装置
产品概述：
符合IEC60065, CL10.3 (100g)、GB8898, UL1310 CL40.2 (50 ±2 grams), IEC60950标准要求，满足GB8898-2001 第 10.3.2 条款要求，外形按照第10.3.2节及图 6 要求而设计制作。用于音频、视频及类似电子设备在进行绝缘电阻和抗电强度试验时，如对薄层绝缘材料进行抗电强度试验时，须采用本抗电强度试验台。
产品参数：
试验针重量：
IEC60065：100 ±2克，直径Ø5mm ± 0.1mm 倒0.5圆角
UL1310：50 ±2 克，直径Ø6.4mm ± 0.1mm 倒0.8圆角
试验针及支撑针直径：
IEC60065：Ø5mm ± 0.1mm (rounded to a 0.5 mm radius)直径Ø5mm ± 0.1mm 倒0.5圆角
UL1310：6.4mm (rounded to a 0.8 mm radius)直径Ø6.4mm倒0.8圆角
UL1310要求：
The insulating material is to be placed between two opposing electrodes. The electrodes are to be cylindrical brass or stainless steel rods 1/4 inch (6.4 mm) in diameter, with edges rounded to a 1/32-inch (0.8 mm) radius. The upper moveable electrode is to weigh 50 ±2 grams to exert sufficient pressure on the specimen to provide good electrical contact. The test potential is to be increased to the test value and the maximum test potential is to be maintained for 1 second. The result is acceptable if there is no dielectric breakdown.
IEC60065图6要求：
